Marvel 6SDZE Anleitung zur Fehlerbehebung PDF herunterladen (Seite 7)

USING YOUR SENTRY SYSTEM™ CONTROL

• Power Interrupt – The Sentry control indicator LED will

display "Power Failure", to notify you that a power out-

age has occurred. It is recommended that you check

the condition of your stored items.

• The Sentry alarms may be enabled or disabled by

pressing and holding the SET key for 5 seconds.

Conrmation of turning the Sentry alarms on or off will

be given by the control beeping 3 times. When Sentry

alarms are enabled, the display will show green "ON".

When Sentry alarms are disabled, the display will show

amber "OFF".

Sabbath Mode:

Your product may be placed into Sabbath mode if desired.

During this time the displays, audible alarms/keypad con-

rmations, and lights will be disabled. To activate Sabbath

mode, press and hold the "Set" keypad while pressing the

"°F/°C" keypad four(4) times within seven(7) seconds. The

display will conrm activation by "ashing" SA seven(7)

times before blanking the display. Sabbath mode will auto-

matically deactivate after 72 hours, or you may cancel it at

any time by repeating the keypad activation sequence. All

control functions and set-point temperatures will remain as

they were prior to entering Sabbath mode.

Turning Off Refrigeration:

You may turn off the refrigeration system in your product for

prolonged cleaning or times when cooling is not required

such as an extended vacation, or absence from a seasonal

residence. To shut off the refrigeration system press and

hold the "ON/OFF" keypad for 5 seconds. Conrmation

will be indicated by the control display going blank. Interior

lights will continue to function for your convenience. To

resume refrigeration, press and hold the "ON/OFF" keypad

for 5 seconds.

Important: Although this action shuts down the refrigeration

system, it does not remove power from the unit. Always

remember to unplug the unit, or remove power from the

receptacle, when servicing the product.

Error Codes:

The Sentry control system continually monitors your prod-

ucts critical refrigeration system components for proper

operation. If a components operating parameters do not

meet normal specications, the control display will indicate

one of the following faults:

• E1 - Compressor

• E2 - Condenser Fan Motor

• E3 - Upper Compartment Sensor

• E4 - Lower Compartment Sensor

If any of these errors occur, a service call by a qualied ser-

vice technician is required, (see Trouble Shooting section

for details).

1 2 3 4 5 6 7 8 9 10 11 12 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

Marvel 6SDZE Anleitung zur Fehlerbehebung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Trinkwasserkühler Marvel 6SDZE