Marvel 6SDZE Anleitung zur Fehlerbehebung PDF herunterladen (Seite 4)

INSTALLING YOUR WINE CELLAR

Select Location

The proper location will ensure peak performance of your

appliance. We recommend a location where the unit will

be out of direct sunlight and away from heat sources. To

ensure your product performs to specications the recom-

mended installation location temperature range is from 55

to 100°F (13 to 38°C).

Cabinet Clearance

Ventilation is required from the bottom front section of the

unit. Keep this area open and clear of any obstructions.

Adjacent cabinets and counter top can be installed around

the unit as long as the front grille remains unobstructed.

Leveling Legs

Adjustable legs at the front and rear corners of the unit

should be set so the unit is rmly positioned on the oor

and level from side to side and front to back. The overall

height of your Marvel refrigerator may be adjusted from

⁄8" (86.1cm) with the leveling legs turned in, and up to

⁄8" (88.6cm) with the leveling legs extended.

To adjust the leveling legs, place the refrigerator on a solid

surface and protect the oor beneath the legs to avoid

scratching the oor. With the assistance of another person,

lean the refrigerator back to access the front leveling legs.

Raise or lower the legs to the required dimension by turn-

ing the legs. Repeat this process for the rear by tilting the

refrigerator forward using caution to prevent the door from

opening. On a level surface check the refrigerator for level-

ness and adjust accordingly.

The front grille screws may be loosened and the grille ad-

justed to the desired height. When adjustment is complete

tighten the two front grille screws. (See Figure 3).

Front

Leveling Legs

Front Grille,

keep this area

open.

Figure 2

Figure 3

Front grille

screw

Front Grille

Do not obstruct the front grille. The openings within the

front grille allow air to ow through the condenser heat ex-

changer. Restrictions to this air ow will result in increased

energy usage and loss of cooling capacity. For this reason

it is important this area to not be obstructed and the grille

openings kept clean. AGA MARVEL does not recommend

the use of custom made grilles as air ow may be restricted

because of inadequate openings. (See Figure 2).

Rear

Leveling

Legs

1 2 3 4 5 6 7 8 9 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

Marvel 6SDZE Anleitung zur Fehlerbehebung Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Trinkwasserkühler Marvel 6SDZE