
Figure 6
Hinge adapter bracket lo-
cated on the top and boom
of the door.
Remove top
hinge pin to re-
move the door.
Door should be
parallel to top
and sides of
refrigerator.
9/32”
(7.1mm)
HANDLE INSTALLATION AND DOOR ALIGNMENT
Handle Installaon (Solid Door Models)
1. Remove the handle, (2) screws, and 5/32” allen wrench from
the bag shipped inside the cabinet.
2. Locate handle opposite the hinges and secure in place using
the (2) screws and the allen wrench. (See Figure 5).
Screws
Handle
Figure 5
Right hand hinged
door shown
Door Reversal
It is possible to reverse the door (change from right hand swing
to le hand swing or vice versa) if you wish. To do so it will be
necessary to order one of the service kits below.
Hinge Color Door Color Right Hand Le Hand
Chrome Black 42247595 42247599
Chrome White 42247639 42247640
Black Black 42247596 42247600
White White 42247597 42247601
Stainless
Steel
Stainless
Steel
42247598 42247602
6
Door Alignment Procedure
The door should be parallel to the sides and top of the refrig-
erator. If alignment is necessary the door may be adjusted by
loosening the 2 screws which secure the hinge adapter brackets
on the top and boom of the door and adjusng the door side
to side. Use a 5/32” allen wrench for this procedure. (See Figure
6 below). When nished aligning the door, ghten the screws
securely.
For the door to close properly, it is necessary to maintain a
minimum space of 9/32” (7mm) between the door and cabinet
ange (See Figure 6). This space can be adjusted by adjusng the
top and boom hinge adapter brackets.
Kommentare zu diesen Handbüchern