Marvel 15CM Spezifikationen PDF herunterladen (Seite 6)

DOOR ALIGNMENT

Figure 5

Hinge adapter bracket lo-

cated on the top and boom

of the door.

Remove top

hinge pin to re-

move the door.

Door must be

parallel to top

and sides of

refrigerator.

9/32”

(7.1mm)

NOTE

For the door to close properly, it is necessary to maintain a

minimum space of 9/32” (7mm) between the door and cabinet

ange (See Figure 5). This space can be adjusted by adjusng the

top and boom hinge adapter brackets.

Door Alignment Procedure

The door should be parallel to the sides and top of the refrig-

erator. If alignment is necessary the door may be adjusted by

loosening the 2 screws which secure the hinge adapter brackets

on the top and boom of the door and adjusng the door side

to side. Use a 5/32” allen wrench for this procedure. (See Figure

5 below). When nished aligning the door, ghten the screws

securely.

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Keine Kommentare

Marvel 15CM Spezifikationen Seite 6