Marvel 15AF Spezifikationen PDF herunterladen (Seite 7)

DOOR ALIGNMENT

Door Alignment Procedure

The door should be parallel to the sides and top of the refrig-

erator. If alignment is necessary the door may be adjusted by

loosening the 2 screws which secure the hinge adapter brackets

to the door and adjusng the door side to side. Use a 5/32” allen

wrench for this procedure. (See Figure 4 below).

Figure 4

Hinge adapter screws loosen

these to adjust door, on the

top and boom of the door

Top hinge pin re-

move to remove

the door.

Door must be

parallel to top

and sides of

refrigerator

9/32”

(7.1mm)

NOTE: For door closer to work properly it is necessary to main-

tain a min. space of 9/32” (7.1mm) between door and cabinet

ange as shown. This space can be adjusted by adjusng the top

and boom hinge adapter.

NOTE

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

1 2 3 4 5 6 7 8 9 10 11 12 ... 21 22

Keine Kommentare

Marvel 15AF Spezifikationen Seite 7